The HP Photosmart C4680 is a printer that allows you to print high-quality photos and documents. In order to use this printer, you need to install the HP Photosmart C4680 driver. The driver is available for free in this page using the links below.

How to Install HP Photosmart C4680 Driver:

1. Once the “HP Photosmart C4680 Driver” download from our website is completed, open the downloaded file.
2. If prompted, agree to the terms and conditions to begin the installation.
3. Follow the on-screen instructions to complete the installation.
4. Once the installation is complete, you can use the HP Photosmart C4680 printer.

Model Details:

The HP Photosmart C4680 is an all-in-one printer that can print, copy and scan. It has a maximum print resolution of 4800 x 1200 dpi and can print at speeds of up to 22 ppm in black and white and 20 ppm in color. The C4680 has a flatbed scanner with an optical resolution of 1200 dpi and can scan at speeds of up to 3 ppm in black and white and 1.5 ppm in color. It also has a 48-bit color depth and can copy at speeds of up to 22 cpm in black and white and 20 cpm in color. The C4680 has a 100-sheet paper tray and uses HP 61 ink cartridges.

Tips and Tricks:

1. Download and install the HP Photosmart C4680 Driver from the HP website.
2. Connect the HP Photosmart C4680 printer to your computer using the USB cable.
3. Open the HP Photosmart C4680 Driver and follow the on-screen instructions to install the driver.
4. Once the driver is installed, you can use the HP Photosmart C4680 printer to print documents and photos.

FAQ:

How do I reset my HP Photosmart c4680 printer?

1. To reset your HP Photosmart c4680 printer, first make sure that the device is turned on. Next, locate the reset button on the printer. This button is usually located on the control panel, near the power button. Once you have located the reset button, press and hold it for a few seconds. The printer should now be reset and ready to use.
2. If your HP Photosmart c4680 printer is still not functioning properly after resetting it, you may need to perform a factory reset. To do this, locate the factory reset button on the printer. This button is usually located on the control panel, near the power button. Once you have located the factory reset button, press and hold it for a few seconds. The printer should now be reset to its factory settings.
3. If you are still having trouble resetting your HP Photosmart c4680 printer, you may need to contact HP customer support for assistance. HP customer support can be reached by phone or online.

How do I change the ink cartridge on my HP Photosmart c4680?

1. Open the top cover of your HP Photosmart c4680 printer.
2. Wait for the carriage to move to the center of the printer.
3. Press down on the old ink cartridge to release it, then pull it straight out of the carriage.
4. Remove the protective cap from the new ink cartridge.
5. Insert the new ink cartridge into the carriage, then push it forward until it clicks into place.
6. Close the top cover of the printer.
7. Your printer will now begin charging the new ink cartridge.

Do HP printers have a reset button?

Yes, HP printers have a reset button. This button is usually located on the back of the printer. Pressing and holding this button for a few seconds will reset the printer and clear any error messages.

How do I factory reset my HP Photosmart printer?

1. Disconnect the printer from the power source.
2. Press and hold the “Power” button for about 30 seconds.
3. Reconnect the printer to the power source and turn it on.
4. Wait for the printer to initialize.
5. Press and hold the “Resume” button for about 3 seconds.
6. Press the “Power” button to turn off the printer.
7. Reconnect the printer to the power source and turn it on.

The printer should now be reset to its factory settings.

Is HP Photosmart C4200 wireless?

The HP Photosmart C4200 is not a wireless printer. In order to print wirelessly, you would need to purchase a wireless printing kit that is compatible with the C4200. The kit would include a wireless print server and a wireless adapter.

How do I change the ink cartridge on my HP PhotoSmart Plus Printer?

To change the ink cartridge on your HP PhotoSmart Plus Printer, first power off the printer. Next, open the printer’s access door and wait for the carriage to move to the center of the printer. Then, squeeze the ink cartridge latch to release the ink cartridge and remove it from its slot. To install the new ink cartridge, remove it from its packaging and insert it into the empty slot. Squeeze the ink cartridge latch to secure it into place. Finally, close the printer’s access door and power on the printer.

How do I change the ink cartridge on my HP PhotoSmart printer?

1. Locate the ink cartridge access door on the right side of the printer.
2. Open the access door and wait for the carriage to move to the center of the printer.
3. Remove the old ink cartridge by gently pushing on the tab and lifting it out of the carriage.
4. Insert the new ink cartridge into the carriage and push on the tab until it clicks into place.
5. Close the ink cartridge access door and wait for the printer to initialize the new ink cartridge.

How do I change my HP Smart Cartridge?

1. Open your HP printer’s lid and locate the ink cartridge carriage on the right side.
2. Use your fingers to squeeze the release latch on the top of the carriage and pull the carriage toward you to access the ink cartridges.
3. Squeeze the release latch on the old ink cartridge and pull it straight up to remove it from the carriage.
4. Remove the new ink cartridge from its packaging and gently remove the plastic film from the nozzles on the bottom of the cartridge.
5. Insert the new ink cartridge into the carriage and push it until it clicks into place.
6. Close the carriage lid and plug in your HP printer to the power source.
7. Turn on your printer and wait for the carriage to initialize before printing a test page.

How do I reset my printer to factory settings?

1. Check your printer’s manual. Many printer manufacturers include a section on resetting the printer to its original, factory settings. This section is usually located near the beginning of the manual, before the troubleshooting section.
2. Look for a reset button or menu option on the printer itself. Many printers have a reset button that can be pressed to restore the printer to its default settings. Others have a menu option that can be accessed by pressing a button or combination of buttons on the printer.
3. Connect the printer to your computer and open the printer’s software. Once the printer is connected to your computer, you may be able to restore the printer to its factory settings through the printer’s software. This option is usually located in the printer’s settings or preferences menu.

How do I reset my HP printer scanner?

1. Turn off the printer and unplug it from the power outlet.
2. Wait for 60 seconds, then plug the printer back in and turn it on.
3. Go to the printer’s control panel and select the “Setup” menu.
4. Select the “Reset” option.
5. Follow the prompts to complete the factory reset.

How do I install ink cartridges in HP Photosmart c4280?

To install ink cartridges in HP Photosmart c4280, first remove the old cartridges from the carriage. Next, insert the new cartridges into the carriage. Make sure that the ink cartridges are firmly seated in the carriage. Finally, close the carriage door and you are done.