If you are looking for an HP OfficeJet Pro 9020 Driver, you can download the driver from the table below based on your operating system.

HP OfficeJet Pro 9020 Driver Downloads

Driver for Windows

How to Install HP OfficeJet Pro 9020 Driver on Your PC:

1. Download the “HP OfficeJet Pro 9020 Driver” from our website.
2. Unzip the file and save it to your desktop.
3. Double-click on the “HP OfficeJet Pro 9020 Driver” icon.
4. Follow the on-screen instructions.

HP OfficeJet Pro 9020 Details:

The HP OfficeJet Pro 9020 is an all-in-one inkjet printer with scan and copy functions, an automatic document feeder and built-in faxing. It works with Windows and macOS. The printer has a medium-size 2.7-inch display and a basic control panel with physical buttons. The 9020 model has a 250-sheet paper capacity, which is average for an all-in-one printer. It also has a 35-sheet automatic document feeder, a duplexer for two-sided printing and copying, and a built-in fax modem. The printer connects to your computer via USB or to your network router via Ethernet or Wi-Fi. The HP OfficeJet Pro 9020 uses four ink cartridges: black, cyan, magenta and yellow.

Recommendations to Better Utilize Your HP OfficeJet Pro 9020:

1. Download and install the HP OfficeJet Pro 9020 Driver from the HP website.
2. Connect the printer to your computer using the USB cable.
3. Open the HP OfficeJet Pro 9020 Driver software and follow the on-screen instructions to set up the printer.
4. Once the printer is set up, you can begin printing documents and photos.

Common Questions:

How do I install HP OfficeJet Pro 9025?

1. Follow the instructions given below for the HP OfficeJet Pro 9025 setup.
2. Once the printer is removed from the box, carefully unpack all the accessories.
3. Connect one end of the power cord to the rear of the printer and plug the other end into an electrical outlet.
4. Turn on the printer by pressing the power button. The printer will go through a self-test process.
5. Wait for the printer to complete the self-test and initialize.
6. To install the HP OfficeJet Pro 9025 printer driver, insert the software CD into the computer’s CD drive.
7. If the AutoPlay window opens, click Run Setup.exe. If the AutoPlay window does not open, browse to the CD drive and double-click Setup.exe.
8. Follow the on-screen instructions to install the HP OfficeJet Pro 9025 printer driver.
9. Once the installation is complete, connect the USB cable from the printer to the computer.
10. The HP OfficeJet Pro 9025 is now ready to use.

How do I setup my HP printer step by step?

1. Unpack your HP printer from the box and remove all packing materials.
2. Plug in the power cord and connect the printer to your computer using the USB cable.
3. Install the HP printer software on your computer.
4. Follow the on-screen prompts to complete the setup process.

How do I connect my HP OfficeJet Pro printer?

1. If your printer uses a USB cable, connect the cable to the back of the printer and plug it into an available USB port on your computer. If you are using a wireless printer, skip this step.
2. Select any print settings you want to change and select Print.

How do I get my computer to recognize my printer?

Assuming you’ve already installed the printer’s software on your computer, there are a few ways to get your computer to recognize your printer.

The first way is to restart your computer. This will usually refresh the system and allow your computer to see the printer.

If that doesn’t work, the next step is to check the printer’s USB cable. Make sure it’s firmly plugged into both the printer and the computer. Sometimes the connection can become loose and cause communication problems.

Finally, if those two steps don’t work, you may need to uninstall and then reinstall the printer’s software on your computer. This will usually fix any communication issues between your computer and the printer.

What is the difference between HP 9025 and 9025e?

The HP 9025 and 9025e are both all-in-one printers that can print, scan, copy, and fax. The main difference between the two models is that the HP 9025e has an automatic document feeder (ADF) that can hold up to 50 pages, while the HP 9025 does not have an ADF. The HP 9025e is also slightly faster, with a print speed of up to 22 pages per minute (ppm) for black-and-white documents and 18 ppm for color documents. The HP 9025 has a print speed of up to 20 ppm for black-and-white documents and 16 ppm for color documents.

How do I print from HP OfficeJet Pro 9025?

In order to print from the HP OfficeJet Pro 9025, you will need to first connect the printer to your computer using a USB cable. Once the printer is connected, you will need to open the document or file that you wish to print. Once the document or file is open, click on the “File” menu and then click on the “Print” option. A new window will now appear and in this window, you will need to click on the “Printer” drop-down menu and select the HP OfficeJet Pro 9025 from the list of printers. Finally, click on the “Print” button and the document or file will begin printing.

How do I scan with HP OfficeJet Pro 9025?

1. Load your originals on the scanner glass or in the document feeder.
2. To scan a single document or photo, select the PDF or Image button. To scan multiple documents at one time, select the Document button.
3. Select your scan settings, then select Start Scan.
4. After the scan completes, open the folder where you saved your scan.

How do I connect my HP DeskJet printer to my computer?

1. Check if your HP DeskJet printer and computer are turned on. If they’re not, turn them on now.
2. Find the cable that came with your printer. It should have a square connector on one end and a USB connector on the other end.
3. Plug the square end of the cable into the back of your printer.
4. Plug the USB end of the cable into an available USB port on your computer.
5. Your printer should now be connected to your computer. You can open the printing software on your computer to start printing.

How do I install my HP wireless printer?

Make sure your printer is turned on.

Then, open the HP Smart app, and add your printer.

Once the printer is added, select Configure printer to complete the wireless setup.

If you have any trouble, consult your printer’s manual.

How do I install my HP DeskJet printer?

1. Unpack your printer. Remove the printer and all packing materials from the box.
2. Connect the power cord to the printer, and then plug the cord into an electrical outlet.
3. Turn on the printer. Press the power button to turn on the printer.
4. Install ink cartridges. Follow the instructions that came with the ink cartridges to insert them into the printer.
5. Connect the printer to your computer. Connect one end of the USB cable to the port on the back of the printer, and then connect the other end to an available USB port on your computer.
6. Install the HP software. Insert the HP software CD into your computer’s CD/DVD drive, and then follow the on-screen instructions to install the software.
7. Add the printer to Windows. When prompted during the software installation, select the option to add the printer to Windows.

Why is my computer not finding my wireless printer?

There are a few things that could be causing this issue. The first thing to check is whether or not the printer is turned on and connected to the correct wireless network. If the printer is turned off or not connected to the same network as your computer, it will not be able to communicate with your computer and print.

If your wireless printer is still not working, it is possible that there is an issue with the printer itself. Try connecting the printer to a different computer to see if it works. If the printer does not work on any computer, there may be a problem with the printer itself and you should contact the manufacturer for assistance.

How do I connect my HP printer to my computer via USB?

1. Turn on your HP printer.
2. Connect the USB cable to both your computer and the printer.
3. Your computer should automatically detect the printer and install any necessary drivers. Once that’s finished, you should be able to print from your computer.

How do you set up a laptop to a printer?

1. Make sure your laptop and printer are both turned on and connected to the same wireless network.
2. Select “add a printer” from the list of options.
3. Follow the on-screen instructions to complete the setup process.

How do I connect my HP wireless printer to my computer?

1. Finally, you can also connect your printer through the HP ePrint app. This app is available for free on the App Store. Once you download and install the app, open it and follow the on-screen instructions to connect your printer.

How do I connect my HP printer to my wireless network?

1. On the printer control panel, go to the Network menu or touch the wireless icon and then select the Wireless Setup Wizard.
2. Select your network name from the list of SSIDs.

If you don’t see your network name listed, touch More SSIDs and then enter your network name.

1. Enter your password or passphrase.
2. Touch Done or Continue. Your printer connects to your wireless network.